China Root Controller System Manufacturers, Suppliers, Factory

PVC Edge Banding Equipment Technical parameters and configuration 1 Specification model SJ65-28/1 2 screw diameter 65mm 3 Screw length-to-diameter ratio 28:1 4 Screw structure type PVC special screw 5 Barrel structure Barrel integrated 6 screw, barrel material 38CrMOALA 7 Screw and barrel nitriding treatment Nitriding treatment 8 screw and barrel service life is about 3 years 9 Main drive variable frequency motor power 18.5KW

PE PP Control Root Board Making Machine with the working principle of hot pressing equipment design. PE PP Control Root Board Making Machine can also produce water spraying sheets 1. PET Root Plant Root Protection Equipment is mainly in accordance with the working principle of hot pressing equipment design, process is: sheet —— feeding —— heating —— pressing —— pressure —— molding —— cutting steps, appearance neat and practical, plate processing all processing center, ensure the accuracy of all hole size, column and pin appearance are hard chromium quenching treatment, ensure the sliding and wear resistance, machine system edited into manual and automatic two parts, in manual case all action can be single operation. 2: The feed motor is driven by a servo motor with a power of 2 kW. 3: feeding reducer motor 0.55KW and 1:10 special reducer, to ensure the stability of feeding speed! 4: Ceramic heating block: new ceramic heating block, heating fast and low power consumption, the temperature can be adjusted freely, according to the thickness of different materials. 5: Other mechanical parts are produced and processed by our company. Automatic control system adopts: Delta PLC control, 6: The machine adopts hydraulic balanced distribution design, the overall balance is better, to solve the situation of the high and low in the production to prolong the use time of the mold.

Soft PVC anti-skid plate extruder equipment: The equipment mainly consists of a single-screw extruder, a three-roller calender, a 6-meter cooling bracket, a rubber roller traction machine, a shearing machine, and a conveyor belt device.

Pvc Crystal Plate Equipment can produce PVC transparent plastic sheets with a width of 800-1200 mm and a thickness of 0.8-5 mm.

pvc lighting panel extruder equipment PVC lighting board extruder equipment: The equipment mainly consists of a twin-screw extruder, a plate mold, a three-roller calender, a cooling bracket, a rubber roller traction machine, a cutting machine, and a conveying device.

1.PE Aluminum Plastic Plate Extruder Equipment adopts a large aspect ratio refining plasticizing and exhausting screw, and is equipped with a water ring vacuum pump to forcefully extract the gas generated during the plasticizing process. It is suitable for the processing of different quality plastics and extruded plastic cores. The surface of the board has no bubbles, is smooth and dense, and is conducive to the adhesion of the polymer film. 2. PE Aluminum Plastic Plate Extruder Equipment uses hydraulic pressure to quickly change the filter head without stopping the machine, ensuring that impurities in the plastic are effectively filtered, and quickly changing the screen without stopping the machine, reducing the labor intensity of workers and ensuring the continuity of plastic core board extrusion. 3. PE Aluminum Plastic Plate Extruder Equipment uses a high-precision thick-walled three-roller mirror calender, which has good rigidity and can precisely adjust the gap between the calender rollers to ensure the thickness tolerance of the plastic core panel, ensure uniform cooling, and make the board surface flat and smooth