China HDPE Sheet Geogrid Equipment Manufacturers, Suppliers, Factory

PE Aluminum-Plastic Composite Panel Production Line (also known as aluminum-plastic panel), as a new building material, and has been quickly favored by people for its economy, the diversity of optional colors, convenient construction methods, excellent processing performance, excellent fire resistance and noble quality. The unique properties of aluminum-plastic composite board determine its wide range of uses: it can be used for building exterior walls, curtain wall panels, renovation of old buildings, indoor wall and ceiling decoration, advertising signs, display stands, purification and dust prevention projects. It belongs to a new type of building material. The products produced by the equipment are mainly suitable for the inner and outer wall PE composite board, the thickness of the product is from 1-6mm, the width of 1200-1500mm two models, the thickness of the aluminum foil is from 0.03-0.5mm, and the bonding process of polymer film or glue can be selected. The equipment has the advantages of one molding, stable extrusion, firm compound, good flatness and so on.

Root Control Making Machine PS Root Controller Forming Machine root controldevice is mainly in accordance with the working principle of hot pressing equipment design. Root control equipment can also produce water spraying sheets 1. Root Control Making Machine is mainly in accordance with the working principle of hot pressing equipment design, process is: sheet —— feeding —— heating —— pressing —— pressure —— molding —— cutting steps, appearance neat and practical, plate processing all processing center, ensure the accuracy of all hole size, column and pin appearance are hard chromium quenching treatment, ensure the sliding and wear resistance, machine system edited into manual and automatic two parts, in manual case all action can be single operation. 2: The feed motor is driven by a servo motor with a power of 2 kW. 3: feeding reducer motor 0.55KW and 1:10 special reducer, to ensure the stability of feeding speed! 4: Ceramic heating block: new ceramic heating block, heating fast and low power consumption, the temperature can be adjusted freely, according to the thickness of different materials. 5: Other mechanical parts are produced and processed by our company. Automatic control system adopts: Delta PLC control, 6: The machine adopts hydraulic balanced distribution design, the overall balance is better, to solve the situation of the high and low in the production to prolong the use time of the mold.

root controldevice is mainly in accordance with the working principle of hot pressing equipment design. Root control equipment can also produce water spraying sheets 1. PET Root Plant Root Protection Equipment is mainly in accordance with the working principle of hot pressing equipment design, process is: sheet —— feeding —— heating —— pressing —— pressure —— molding —— cutting steps, appearance neat and practical, plate processing all processing center, ensure the accuracy of all hole size, column and pin appearance are hard chromium quenching treatment, ensure the sliding and wear resistance, machine system edited into manual and automatic two parts, in manual case all action can be single operation. 2: The feed motor is driven by a servo motor with a power of 2 kW. 3: feeding reducer motor 0.55KW and 1:10 special reducer, to ensure the stability of feeding speed! 4: Ceramic heating block: new ceramic heating block, heating fast and low power consumption, the temperature can be adjusted freely, according to the thickness of different materials. 5: Other mechanical parts are produced and processed by our company. Automatic control system adopts: Delta PLC control, 6: The machine adopts hydraulic balanced distribution design, the overall balance is better, to solve the situation of the high and low in the production to prolong the use time of the mold.

1.PE Aluminum Plastic Plate Extruder Equipment adopts a large aspect ratio refining plasticizing and exhausting screw, and is equipped with a water ring vacuum pump to forcefully extract the gas generated during the plasticizing process. It is suitable for the processing of different quality plastics and extruded plastic cores. The surface of the board has no bubbles, is smooth and dense, and is conducive to the adhesion of the polymer film. 2. PE Aluminum Plastic Plate Extruder Equipment uses hydraulic pressure to quickly change the filter head without stopping the machine, ensuring that impurities in the plastic are effectively filtered, and quickly changing the screen without stopping the machine, reducing the labor intensity of workers and ensuring the continuity of plastic core board extrusion. 3. PE Aluminum Plastic Plate Extruder Equipment uses a high-precision thick-walled three-roller mirror calender, which has good rigidity and can precisely adjust the gap between the calender rollers to ensure the thickness tolerance of the plastic core panel, ensure uniform cooling, and make the board surface flat and smooth

Seedling Box Plug Tray equipment technical parameter Specification width of used sheet: 300~320mm, thickness: 0.8~2mm. Forming area (maximum): 400*600 mm, working efficiency of 15~20 times / minute. Power used: three-phase four-wire 380 volts, maximum power 25KW Hydraulic pressure: 100T External size (mm) length, width and height) 3600mm*980mm*1500mm

HDPE Sheet Geogrid Equipment is used to produce geocells. The first step of this product is to produce sheets, and then the sheets are cut online, and then the plastic sheets are connected through ultrasonic welding and other methods